Hydraulic Power Units

Designed and assembled in Canada, Eagle Hydraulic Power Units are built with the focus to quality. Eagle power units are rugged enough to withstand the harsh cold and winter conditions of Canada to the booming heat in Texas. We have partnered only with the best suppliers to ensure that our Power Units are powerful and reliable. We have many options for you to consider, Eagle Power Units are completely customizable to suit your application requirements.


Eagle Hydraulic Power Units Can Be Found On:

  • Utility Trailers
  • Tailgate Lifts
  • Aerial Ladder Trucks
  • Lift Tables

Only the best components will do. Eagle Hydraulic Power Units are built with quality in mind.


As a progressive company, Eagle has developed our own line of hydraulic power units. Designed in Canada utilizing only the best sourced components, our product is high quality, rugged and reliable. Assembled in Montreal, Canada, our hydraulic power unit can withstand the cold of the north to the heat from the south. Eagle hydraulic power units are fully customizablee with many design and accessory options.

Our hydraulic power unit is a perfect choice when mated with one of our hydraulic cylinders such as our HTC Telescopic or any of our other hydraulic cylinder options. You can find Eagle hydraulic power units installed on many equipment across North America, including dump trailers, aerial trucks, lift tables and the list goes on...

Eagle Hydraulic POWER UNIT

  • SINGLE OR DOUBLE ACTING CONFIGURATION AND MORE...
  • 3 RANGES OF MOTORS STANDARD, HEAVY DUTY & LONG DUTY
  • POWER UP, DOWN OR BOTH
  • MULTIPLE RELIEF VALVES AVAILABLE
  • 12V, 24V DC and 115V, 230V, 575V AC
  • PUMP FLOW 0.75cc TO 8.0cc
  • SHRINK TUBE COVERED WIRES
  • MANUAL CONTROL, 2 OR 4 BUTTONS
  • WIRELESS REMOTE - LONG RANGE
  • 20' CABLE MANUAL REMOTE
  • LOWER AMPERAGE DRAW
  • ISOLATED GROUND
  • LOW NOISE
  • TESTED AT 3000PSI
  • MINIMAL REBOUND SOLENOID
  • PUMP HAS BEEN INDEPENDANTLY TESTED FOR 300,000 CYCLES
    (Same flow and pressure ater testing)


100% Tested


Tested to perfection, every Eagle Hydraulic Power Unit goes through a thorough pressure test to assure compliance and quality expectations.

All Options Available

PLASTIC TANKS
From 3.9 Liters [1.03 USGAL] to 15.12 Liters [4.0 USGAL], these plastic tanks are ideal for installation where moisture is present.

Avalaible Models
METAL TANKS
Round or Rectangular, these metal thanks are robust with a wall thickness of 3.2mm. From 1.7 Liters [0.45 USGAL] to 26.46 Liters [7.0 USGAL], our various models can accomodate your needs.


Avalaible Models
PRESTOLITE MOTORS "AMETEK"
Eagle partners with Ametek to manufacture High Quality Solenoids and Motors

12V, 24V DC

AC MOTORS - ETL Certified by Intertek
Eagle manufacture Hydraulic Power Units with AC Motors

115V, 230V, 575V AC

RUGGED NO STICK SOLENOID
Shrink wrapped wires to prevent moisture

Wires bound together, very clean installation with clips
HIGHEST QUALITY PUMPS
Flow Avalaible:
0.8cc, 1.0cc, 1.3cc, 1.6cc, 2.1cc, 2.5cc, 3.2cc, 4.2cc, 5.8cc and 8.0cc